Bones and Joints of the Foot and Ankle Overview | footEducationfootEducation
Regions of the foot:Hind-foot - as the name suggests, the hindfoot is the portion of the foot closest to the center of the body. It begins at the ankle joint and stops at the calcaneal-cuboid
joint.Mid-foot - The midfoot begins with the calcaneal-cuboid joint and essentially ends where the metatarsals begin. While it has several more joints than the hind-foot, it still possesses little
mobility.Fore-foot - the fore-foot is composed of the metatarsals, and phalanges. The bones that comprise the fore-foot are those that are last to leave the ground during walking.
Mobile Joints of the foot and ankle:Ankle jointSub-talar jointTalo-navicular jointMetatarso-phalangeal (MTP) joints.
Joints that move a moderate amount :Calcaneal-cuboid jointCuboid-metatarsal joint for the fourth and fifth metatarsal.Navicular-cuneiform jointsJoints of midfoot or "Lisfranc"?? Joint (a.k.a.
tarso-metatarsal (TMT) joints or cuneiform-metatarsal joints)
Bones of the lower leg and hind-foot: Tibia, Fibula, Talus, Calcaneous.Tibia and Fibula (Long Bones)
Though the tibia (commonly called the shin bone) is not a part of the foot, it plays an important role. The foot is connected to the body where the bones of the foot and ankle meet the tibia and
fibula (the small bone to the outside of the tibia). The tibia is also responsible for holding up 85% of the weight that presses down on the foot in the standing position. The tibia and fibula are
held together by a tough layer of connective tissue, known as the Interosseous Membrane. The membrane thickens at the lower part of the leg, in order to make the ankle more stable. These two bones
connect with the talus by forming a sort of dish which the talus fits into. This dish?? is known as the mortise of the ankle joint.
The talus is something of an odd bone because of its strange shape and the fact that 70% of this bone is covered with hyaline cartilage (joint cartilage). The talus acts as a "ball joint" playing the
critical roll of connecting the lower leg to the foot. The talus is covered by so much cartilage because it connects so many different bones. The talus holds the ankle together by connecting to the
lower leg with a ball joint, connects to the calcaneous on the underside through the subtalar joint, and helps connect the back part of the foot (hindfoot) to the midfoot via the talo-navicular
joint. These series of connections allow the foot to rotate smoothly around the talus, as when you roll your ankle in a circle. Unfortunately, the talus has relatively poor blood supply, which means
that injuries to this bone take greater time to heal than might be the case with other bones.
Parts of the Talus
The talus is generally thought of as having three or four parts:
The talar body including the "dome" of the talusThe talar neckThe talar head
The talar body is roughly square in shape and is topped by the dome, connects the talus to the lower leg at the ankle joint. The talar head interacts with the navicular bone to form the
talo-navicular joint. The talar neck is located between the body and head of the talus, and remarkable because it is one of the few areas of the talus not covered with cartilage, and is one of the
few places that blood can flow to in the talus.
Calcaneus (The Heel Bone)
The calcaneus is commonly referred to as the heel bone. The calcaneus is the largest bone in the foot, and along with the talus, it makes up the area of the foot known as the hind-foot. The calcaneus
is something like an oddly shaped egg; hard cortical bone on the outside covers softer cancellous bone on the inside. There are three protrusions on the top surface of the calcaneus (the posterior,
middle, and anterior "facets") that allow the talus to sit on top of the calcaneus, forming the sub-talar joint. The calcaneus also joins to another bone at the furthest end away from the lower leg
toward the toes. At this end, the calcaneus connects to the cuboid bone to form the calcaneal-cuboid joint.
The talus rests above the calcaneous to form the subtalar joint. However, the talus does not sit directly on top of the calcaneus. Instead, it rests slightly offset toward the outside of the foot
(the side nearest the little toe). This positioning allows the foot to cope with uneven terrain because it allows a little more flexibility from side to side. The subtalar joint doesn't move
independently, it moves along with the talo-navicular joint and the calcaneo-cuboid joint, two joints located near the front of the talus.
Bones of the Mid-foot: Cuboid, Navicular, Cuneiform (3)
The cuboid bone is the main bone of the mid-foot. It is a square-shaped bone on the outside of the foot, and possesses several places to connect with other bones. The main joint formed with the
cuboid is the calcaneo-cuboid joint. Farther along its length, the cuboid also connects with the base of the fourth and fifth metatarsals (the metatarsals of the last two toes). On the inner side, it
also connects with one of the lateral cuneiform bones.
The calcaneal-cuboid joint attaches the heel bone to the cuboid.
The navicular is located in front of the talus and connects with it through the talo-navicular joint. The navicular is curved on the surface nearest ankle. The side farthest from the ankle joint
connects to each of the three cuneiform bones. Like the talus, the navicular has a poor blood supply. On the inner side (closest to the middle of the foot), there is a piece of bone that juts out,
which is called the navicular tuberosity. This is the site where the posterior tibial tendon anchors into the bone.
As the name suggests, the talo-navicular joint connects the talus to the navicular. The curve of the navicular is designed to connect smoothly with the front surface of the talus. This joint allows
for the potential to have significant motion between the hindfoot and the midfoot depending on the position the hindfoot is in.
There are three different cuneiform bones present side-by-side in the midfoot. The one located on the inside of the midfoot is called the medial cuneiform. The middle cuneiform is located centrally
in the midfoot and to the outside is the lateral cuneiform. All three cuneiforms line up in a row and articulate with the navicular forming the naviculo-cuneiform joint. The structure of the
cuneiforms is similar to a roman arch. Each cuneiform connected to the others in order to form a more stable unit. These bones, along with the strong plantar and dorsal ligaments that connect to
them, provide a good deal of stability for the midfoot.
Bones of the Fore-foot: Metatarsals (5), Phalanges (14), Sesmoid Bones (2)
Each foot contains five metatarsals. These are the long bones that lead to the base of each toe. The metatarsals are numbered 1-5 starting on the inside and leading outward (from big toe to
smallest). Each metatarsal is a long bone that joins with the mid-foot at its base, a joint called the tarsal-metatarsal joint, or Lisfranc joint. In general, the first three metatarsals are more
rigidly held in place than the last two, although in some individuals there is increased motion associated with the 1st metatarsal where it joins the midfoot (at the 1st tarso-metatarsal joint) and
this increased motion may predispose them to develop a bunion.
The long part of the metatarsal bone is known as the metatarsal "shaft", and the thick end of the bone nearest the toes is known as the metatarsal "head" (the metatarsal neck lies between the shaft
and head). The head serves two very important functions:
First, the metatarsal heads are the locations were weight bearing takes place.Second, the phalanges connect to the foot at the metatarsal heads at a joint called the metatarsal-phalangeal joint.
These joints are very flexible, allowing the metatarsal heads to continuously support the weight of the body as the foot moves from heel to toe.
First Metatarsal - The largest of the metatarsals both in terms of length and width. The first metatarsal is the largest of the group both in length and width.
Second Metatarsal - The fore-foot is made extremely stable not only by the ligaments connecting the bones, but also because the second metatarsal is recessed into the medial cuneiform in comparison
to the others. The second metatarsal may be overly long in some individuals prediposing to 2nd metatarsalgia.
Fourth and Fifth Metatarsal - The fourth and fifth metatarsal may have greater range of motion than the others do.
The phalanges make up the bones of the toes. They are connected to the rest of the foot by the metatarsal-phalangeal joint. The first toe, also known as the great toe due to its relatively large
size, is the only one to be comprised of only two phalanges. These are known as the proximal phalanx (closest to the ankle) and the distal phalanx (farthest from the ankle).
The four "lesser toes" (toes 2-5) all have three phalanges. The phalanx closest to the ankle is known as the proximal phalanx, this articulates with the "middle" phalanx the proximal interphalangeal
joint (PIP joint). The middle phalanx meets the "distal" phalanx at the distal interphalangeal joint. An inbalance in the tendons pulling acroos these small joints of the toes will lead to deformity
of the toe sucha s a clawtoe. A list of the joints of the toes can be found below.
Inter-Phalangeal Joint (great toe only)Proximal Inter-Phalangeal Joint (PIP joint - toes 2-5)Distal Inter-Phalangeal Joint (DIP joint -toes 2-5)
A sesamoid bone is a bone that is also part of a tendon. An easy example of such a bone is the kneecap (patella). In the foot there are two sesamoid bones, each of which is located directly
underneath the first metatarsal head. These seasmoids are part of the flexor hallucis brevis tendon.
Edited November 19th, 2009